Horiba LAQUA Twin Sodium Meter
Only compact meter for a quick and reliable measurement of sodium ion at the scene using ion selective membrane.*1
Applications Include: Health management; food quality control*2; environmental measurement; salt water damage testing *1 Ion measurement can be affected by non-target ions *2 Detection of ion in water only; electrolytes in oils cannot be measured.
- Auto-calibration function recognizes standards and is user-selectable for either one- or two-point calibrations.
- Temperature compensation
- IP67 waterproof
- Auto hold
- Automatic power off（30 minutes）
One meter – Six different methods
- Immersion – When you’re in the lab, you can test the sample in a beaker. Ensure the sensor guard cap is open.
- Scoop – Use as a scoop to test water, for example from a river.
- Drops – LAQUAtwin meters can measure sample volumes as low as 0.05 mL*2. Place a drop of the sample onto the sensor with a pipette. *2 Using the HORIBA sampling sheet, volumes down to 0.05 ml can be tests (except for conductivity measurements)
- Solid samples – Foods containing some moisture can be tested by placing a small piece directly onto the sensor.
- Powders – LAQUAtwin meters can also test dry powders. Simply place the powder sample onto the sensor, and drop on your defined volume of pure water.
- Paper and textiles – To test sheets of paper and textiles, cut up the sample into small pieces and place directly onto the sensor. Drop on your defined volume of pure water.